Hosted by IDTechEx
Advanced Materials World
May 13, 2020
Free-to-attend virtual event on Opportunities for Printed Electronics

Free-to-attend virtual event on Opportunities for Printed Electronics

Hear from Coca-Cola, Swarovski, Electrolux, Roartis and Neotech AMT at this new free-to-attend online conference from IDTechEx, hosts of the world's largest event series on Printed & Flexible Electronics.
Advanced Materials World
May 8, 2020
New Materials Make Supercapacitors Better Than Batteries

New Materials Make Supercapacitors Better Than Batteries

The new IDTechEx report, "Supercapacitor Materials and Formats 2020-2040" explains why supercapacitors and their variants still only constitute a modest business.
Advanced Materials World
May 6, 2020
Digital Water Increases Efficiency in Water and Wastewater Industries

Digital Water Increases Efficiency in Water and Wastewater Industries

Digital water technologies will innovate and drive forward new solutions in the water and wastewater industries. The new IDTechEx report, "Digital Water Networks 2020-2030", discusses the players, technologies, and market opportunities for this exciting new technology area.
Advanced Materials World
May 6, 2020
Flexible Hybrid Electronics: Future of Flexible Printed Circuit Boards

Flexible Hybrid Electronics: Future of Flexible Printed Circuit Boards

Flexible hybrid electronics (FHE) is a novel approach to electronic circuit manufacturing that aims to combine the best of printed and conventional electronics.
Advanced Materials World
Apr 30, 2020
What You Should Know About Micro-LED Displays

What You Should Know About Micro-LED Displays

From mobile phones, TVs, to cars and public screens, displays have become an important component in our daily life to convey information. There is an emerging display type — micro-LED display, that has the potential to become the next-generation mainstream, with its ability to be fabricated from tiny to huge sizes.
Advanced Materials World
Apr 24, 2020
Conductive Inks: Hybrid Electronics, In-Mold Electronics, Skin Patches

Conductive Inks: Hybrid Electronics, In-Mold Electronics, Skin Patches

Conductive ink business is inherently wonderfully diverse. This has allowed the industry to rejuvenate itself time and time again and to remain very relevant through generations of product lifecycles.
Advanced Materials World
Apr 23, 2020
IDTechEx Predicts the Digital Water Market to Be Over $2Bn by 2030

IDTechEx Predicts the Digital Water Market to Be Over $2Bn by 2030

Data can drive insights, increase efficiency, and provide detailed information about current water and wastewater networks. The water industry is one which has many unknowns, and more data can provide help to this mature and large industry.
Advanced Materials World
Apr 15, 2020
Conductive Inks: 5G, Automotive, Power Electronics, PV, E-Packaging

Conductive Inks: 5G, Automotive, Power Electronics, PV, E-Packaging

Conductive ink business is inherently wonderfully diverse, which has allowed the industry to rejuvenate itself time and again and to remain relevant through generations of product lifecycles. This diversity, however, presents a market segmentation, evaluation, and prioritization challenge for many small and large players across the world.
Advanced Materials World
Apr 13, 2020
Routes to 3D Electronics: Assessment of Technologies and Applications

Routes to 3D Electronics: Assessment of Technologies and Applications

Metallization of 3D surfaces is a growing field with diverse applications. In this article, we briefly discuss some techniques and applications thereof. More specifically, we discuss and critically benchmark laser direct structuring, aerosol, 3D printed electronics, two-shot molding and In-Mold Electronics.
Advanced Materials World
Apr 8, 2020
Quantum Dots: Progress, Challenges And Future In LED Lighting

Quantum Dots: Progress, Challenges And Future In LED Lighting

In this article, we discuss the challenges and prospects faced by QDs in the general lighting market. This article draws from the report "Quantum Dot Materials and Technologies 2020-2030: Trends, Markets, Players".
Advanced Materials World
Apr 1, 2020
Bioplastics Could Help Plastic Pollution

Bioplastics Could Help Plastic Pollution

The world has a plastics problem. Every day, approximately 8 million pieces of plastic make their way into the world's oceans and plastic pollution can now be found on every beach in the world, from busy tourist beaches to uninhabited tropical islands.
Advanced Materials World
Mar 25, 2020
The Plastic Problem is Getting Worse. Could Bioplastics be the Answer?

The Plastic Problem is Getting Worse. Could Bioplastics be the Answer?

Plastic pollution is rapidly becoming one of the world's biggest environmental issues as increasing production of single use plastic products far outweighs the world's ability to deal with them.
Advanced Materials World
Mar 20, 2020
Thermal Interface Materials for Electric Vehicle Battery Packs

Thermal Interface Materials for Electric Vehicle Battery Packs

The EV market is booming. The battery is a key feature for both cost and performance, the chemistry and cell levels are extensively discussed. However, everything else that goes into a pack is often overlooked.
Advanced Materials World
Mar 3, 2020
3D Printing of Composites: Start-ups Compete for Market Share

3D Printing of Composites: Start-ups Compete for Market Share

IDTechEx calculated that this industry received over $100m in investment in 2019. There are very good reasons for both the composite and 3D printing industry to be excited.
Advanced Materials World
Feb 26, 2020
Training on Emerging Technologies at IDTechEx Masterclasses

Training on Emerging Technologies at IDTechEx Masterclasses

Masterclasses are the ideal way to train staff on emerging technologies. Bracketing the IDTechEx show in Berlin, the IDTechEx masterclasses on 12th and 15th May 2020 will contain the latest insights and analysis on their chosen topics.
Advanced Materials World
Feb 26, 2020
In-Mold Electronics: Starting Simple to Reach One Billion Dollars

In-Mold Electronics: Starting Simple to Reach One Billion Dollars

In-Mold Electronics (IME) will one day become a well-established process with a well-developed ecosystem and a mature, easy-to-use design-to-product workflow. This process will become the basis of many novel structural electronic designs and products.
Advanced Materials World
Feb 24, 2020
Keeping Cool as the Electric Vehicle Market Heats Up

Keeping Cool as the Electric Vehicle Market Heats Up

Some of the biggest hurdles to widespread adoption of electric vehicles are range anxiety, battery longevity and safety. As the electric vehicle market grows and for it to reach its full potential, there is an increased need for effective thermal management of the vehicles.
Advanced Materials World
Feb 19, 2020
Growth Sectors for Conductive Inks as They Solve More Problems

Growth Sectors for Conductive Inks as They Solve More Problems

In 2020 the market for conductive inks will be $2.4Bn, according to extensive research by IDTechEx. Of that, 95% of the conductive ink supply by value goes into just three applications. However, for years now there has been work on a myriad of new applications for conductive ink, in this article we assess some of those opportunities.
Advanced Materials World
Feb 19, 2020
Navigate the Emerging Graphene Market

Navigate the Emerging Graphene Market

Graphene is on the cusp of significant market growth; the opportunities are exciting and diverse, each with significant potential. Graphene and 2D Materials Europe 2020 (13-14 May, Berlin) is the largest B2B event on the topic with a dedicated focus on the commercial frontiers. www.GrapheneEurope.tech
Advanced Materials World
Feb 14, 2020
Die Attach Materials in Electric Vehicles: How Will the Market Grow

Die Attach Materials in Electric Vehicles: How Will the Market Grow

The rise of electric vehicles is creating many new material opportunities. One such material class is the die attach material used in power electronics.
Advanced Materials World
May 13, 2020
Free-to-attend virtual event on Opportunities for Printed Electronics

Free-to-attend virtual event on Opportunities for Printed Electronics

Hear from Coca-Cola, Swarovski, Electrolux, Roartis and Neotech AMT at this new free-to-attend online conference from IDTechEx, hosts of the world's largest event series on Printed & Flexible Electronics.
Advanced Materials World
May 6, 2020
Digital Water Increases Efficiency in Water and Wastewater Industries

Digital Water Increases Efficiency in Water and Wastewater Industries

Digital water technologies will innovate and drive forward new solutions in the water and wastewater industries. The new IDTechEx report, "Digital Water Networks 2020-2030", discusses the players, technologies, and market opportunities for this exciting new technology area.
Advanced Materials World
Apr 30, 2020
What You Should Know About Micro-LED Displays

What You Should Know About Micro-LED Displays

From mobile phones, TVs, to cars and public screens, displays have become an important component in our daily life to convey information. There is an emerging display type — micro-LED display, that has the potential to become the next-generation mainstream, with its ability to be fabricated from tiny to huge sizes.
Advanced Materials World
Apr 23, 2020
IDTechEx Predicts the Digital Water Market to Be Over $2Bn by 2030

IDTechEx Predicts the Digital Water Market to Be Over $2Bn by 2030

Data can drive insights, increase efficiency, and provide detailed information about current water and wastewater networks. The water industry is one which has many unknowns, and more data can provide help to this mature and large industry.
Advanced Materials World
Apr 13, 2020
Routes to 3D Electronics: Assessment of Technologies and Applications

Routes to 3D Electronics: Assessment of Technologies and Applications

Metallization of 3D surfaces is a growing field with diverse applications. In this article, we briefly discuss some techniques and applications thereof. More specifically, we discuss and critically benchmark laser direct structuring, aerosol, 3D printed electronics, two-shot molding and In-Mold Electronics.
Advanced Materials World
Apr 1, 2020
Bioplastics Could Help Plastic Pollution

Bioplastics Could Help Plastic Pollution

The world has a plastics problem. Every day, approximately 8 million pieces of plastic make their way into the world's oceans and plastic pollution can now be found on every beach in the world, from busy tourist beaches to uninhabited tropical islands.
Advanced Materials World
Mar 20, 2020
Thermal Interface Materials for Electric Vehicle Battery Packs

Thermal Interface Materials for Electric Vehicle Battery Packs

The EV market is booming. The battery is a key feature for both cost and performance, the chemistry and cell levels are extensively discussed. However, everything else that goes into a pack is often overlooked.
Advanced Materials World
Feb 26, 2020
Training on Emerging Technologies at IDTechEx Masterclasses

Training on Emerging Technologies at IDTechEx Masterclasses

Masterclasses are the ideal way to train staff on emerging technologies. Bracketing the IDTechEx show in Berlin, the IDTechEx masterclasses on 12th and 15th May 2020 will contain the latest insights and analysis on their chosen topics.
Advanced Materials World
Feb 24, 2020
Keeping Cool as the Electric Vehicle Market Heats Up

Keeping Cool as the Electric Vehicle Market Heats Up

Some of the biggest hurdles to widespread adoption of electric vehicles are range anxiety, battery longevity and safety. As the electric vehicle market grows and for it to reach its full potential, there is an increased need for effective thermal management of the vehicles.
Advanced Materials World
Feb 19, 2020
Navigate the Emerging Graphene Market

Navigate the Emerging Graphene Market

Graphene is on the cusp of significant market growth; the opportunities are exciting and diverse, each with significant potential. Graphene and 2D Materials Europe 2020 (13-14 May, Berlin) is the largest B2B event on the topic with a dedicated focus on the commercial frontiers. www.GrapheneEurope.tech
Advanced Materials World
May 8, 2020
New Materials Make Supercapacitors Better Than Batteries

New Materials Make Supercapacitors Better Than Batteries

The new IDTechEx report, "Supercapacitor Materials and Formats 2020-2040" explains why supercapacitors and their variants still only constitute a modest business.
Advanced Materials World
May 6, 2020
Flexible Hybrid Electronics: Future of Flexible Printed Circuit Boards

Flexible Hybrid Electronics: Future of Flexible Printed Circuit Boards

Flexible hybrid electronics (FHE) is a novel approach to electronic circuit manufacturing that aims to combine the best of printed and conventional electronics.
Advanced Materials World
Apr 24, 2020
Conductive Inks: Hybrid Electronics, In-Mold Electronics, Skin Patches

Conductive Inks: Hybrid Electronics, In-Mold Electronics, Skin Patches

Conductive ink business is inherently wonderfully diverse. This has allowed the industry to rejuvenate itself time and time again and to remain very relevant through generations of product lifecycles.
Advanced Materials World
Apr 15, 2020
Conductive Inks: 5G, Automotive, Power Electronics, PV, E-Packaging

Conductive Inks: 5G, Automotive, Power Electronics, PV, E-Packaging

Conductive ink business is inherently wonderfully diverse, which has allowed the industry to rejuvenate itself time and again and to remain relevant through generations of product lifecycles. This diversity, however, presents a market segmentation, evaluation, and prioritization challenge for many small and large players across the world.
Advanced Materials World
Apr 8, 2020
Quantum Dots: Progress, Challenges And Future In LED Lighting

Quantum Dots: Progress, Challenges And Future In LED Lighting

In this article, we discuss the challenges and prospects faced by QDs in the general lighting market. This article draws from the report "Quantum Dot Materials and Technologies 2020-2030: Trends, Markets, Players".
Advanced Materials World
Mar 25, 2020
The Plastic Problem is Getting Worse. Could Bioplastics be the Answer?

The Plastic Problem is Getting Worse. Could Bioplastics be the Answer?

Plastic pollution is rapidly becoming one of the world's biggest environmental issues as increasing production of single use plastic products far outweighs the world's ability to deal with them.
Advanced Materials World
Mar 3, 2020
3D Printing of Composites: Start-ups Compete for Market Share

3D Printing of Composites: Start-ups Compete for Market Share

IDTechEx calculated that this industry received over $100m in investment in 2019. There are very good reasons for both the composite and 3D printing industry to be excited.
Advanced Materials World
Feb 26, 2020
In-Mold Electronics: Starting Simple to Reach One Billion Dollars

In-Mold Electronics: Starting Simple to Reach One Billion Dollars

In-Mold Electronics (IME) will one day become a well-established process with a well-developed ecosystem and a mature, easy-to-use design-to-product workflow. This process will become the basis of many novel structural electronic designs and products.
Advanced Materials World
Feb 19, 2020
Growth Sectors for Conductive Inks as They Solve More Problems

Growth Sectors for Conductive Inks as They Solve More Problems

In 2020 the market for conductive inks will be $2.4Bn, according to extensive research by IDTechEx. Of that, 95% of the conductive ink supply by value goes into just three applications. However, for years now there has been work on a myriad of new applications for conductive ink, in this article we assess some of those opportunities.
Advanced Materials World
Feb 14, 2020
Die Attach Materials in Electric Vehicles: How Will the Market Grow

Die Attach Materials in Electric Vehicles: How Will the Market Grow

The rise of electric vehicles is creating many new material opportunities. One such material class is the die attach material used in power electronics.
More IDTechEx Journals